Proteg Wheel spacers

These fit all 04-08 Acura TL's and also any wheel take takes a 5x114.3 - M12x1.5 lugs with a 64.1mm bore size.

Our spacers are made from forged 6061 T6 , CNC machined which ishigh quality

Be aware 15mm, some backings don't allow for the studs to go in, so please make sure before ordering that 15mm will work. To be short and sweet, 15mm will work on all cars hubs, but the back of the wheel sometimes doesn't allow for it and hits, which some trimming of the studs would be needed. If the spacers are opened/used remember they can't be returned.

These spacers aren't the typical cheap spacer you will see that falls apart, rusts to your wheel/hub and is unsafe.

These spacers come in a set (2) with extended lugs attached which makes these plug and play, no need to install extended lugs into your cars hub.

The default is for 15mm spacers, there is a small price difference for 20+

Spacers are sold for show purposes / off road only. Professional installation recommended.

Intended for show only, not racing or road use. Owner uses at own risk of install / liability. Sold as is, no refunds due to nature of product and we can't sell them used. User must check over course of time to make sure they are on tight and right to avoid any issues.