Product Description
Acura TL 2004-2008 Fiber Kreations Rear Window Spoiler
Would advise you to use some Glue/Epoxy as well. Not responsible for it flying off, getting stolen, etc. Please make sure its on secure like anything else you put on your car.
Fiberglass ( Paintable ), make sure the painter DOES NOT WARP this by putting this in the oven. It needs to be air dried..Any fitment issues have to be pointed out BEFORE painting with pictures. We highly recommend also some epoxy/silicone as well just incase of any small gaps due to tape. Tape is quick and easy, but never a permanent solution.
As said above, we are talking about fitment issues. The primed version is NOT finished, some light sanding may need to be done for aesthetics / looks. These are hand sculpted and produced, there will be minor imperfections here or there, some sanding needed and the top of the roof will never be "glass".
Fiber glass - ready to paint MAY need some final sanding / touches depending upon what kind of primer / paint your using. This we would say is 99% ready to lay the paint down.
Fits All 2004-2008 Acura TL's, including TYPE-S
Add Tape
The option to add tape to the order comes in 3.
First option. You have a means to securely install yourself and don't need anything. You can also glue the product, use anything you want to secure. properly
The Second option - 5 pound, this will hold, but we highly recommend making sure its on properly and secure as we aren't responsible for them being stolen / fly off.
The Third option - 30 pound. This is very strong tape. Its not cheap and holds very well, but again, not responsible if its improperly installed and stolen / fly's off.
The key is to make sure its installed on a clean surface, no debris, cleaned rear window and never on a cold day. Its recommend to heat up the tape / rear glass and then painters tape the spoiler down so the tape can adhere. Remember, tape needs a few cycles to flex / soften and harden to properly make a tight grip seal.
Don't be fooled, the difference between a solid fiberglass and laid dry carbon like this one compared to a weak / flimsy and shallow piece is yes a price difference, but there is a reason why its cheaper!
Made from the finest carbon fiber available "Grade A"
Protected with UV coating, that will it to hold its high gloss finish, won't fade
Tight carbon weave
Carbon weaves are wrapped completely around the edge
Edges are rounded not cut
Bottom Is flat for nice fitment and contact points
Fiber glass - ready to paint MAY need some final wet sanding depending upon what kind of primer / paint your using. This we would say is 99% ready to lay the paint down.
Please allow 3-5 business days to properly package / box up and schedule a pick up for this item.
Like all carbon, fitment will be the best it can. Fitment maybe a slight bit off or it maybe perfect because it does need to be adjusted like anytime you replace a part. Grade A carbon fiber. No warranty because like all carbon fiber if you don't take care of it, the sun may cause issues over time. This is with ALL carbon fiber. Make sure to take care of it, and it will last! Be aware while this may scare you, we pride ourselves in making our carbon. We use nothing but the best dry carbon with an added protection of clear on top. This is not flimsy, thin, cheap feeling stuff, its just nothing last if you don't take care of it so we want you to be aware of this. As you see from the pictures, these products are some of the best hand made products. Some imperfections may occur, if a seller claims they are perfect, well, nothing or no one is perfect. Due to its fragile state, and being on the front of the car we are not responsible for it cracking due to road debris, or any other thing hitting the car. Customer is to check upon arrival and if it looks good and is installed, that is where our responsibility of the part ends.
Product Videos
Custom Field
Product Reviews
4 Reviews Hide Reviews Show Reviews
-
Carbon fiber roof spoiler
Looks very good, and it’s worth the buy. I did have to use three layers of 3M tape to install due to the curve on it not being perfect, but otherwise is no hassle to install.
-
Review
Piece was perfect as described, packaging was the best I’ve ever seen. Will always shop with Endless!
-
Fiber creations cf roof spoiler
As always EndLessRPM has put out another amazing product! The carbon fiber (CF) roof spoiler is just as beautiful, lightweight and a very well made product as all the other CF products they supply. This matches perfectly with my CF hood, trunk and gas door lid. If you love CF this is just one of the many products you need from EndLessRPM! Thanks Bruce!
-
Great product
This product is exactly what I was looking for, Yeah it took wayyy longer than I thought for it to get shipped even though I did presale buy it but it's here now and I love it.